Manual ic 2000

Programming help and status. T o reset, press simultaneously on the. On energisation or after having reset see the New Features chapter :. V validation of the IC function. The following information can be read on the display:. The position of the threshold in the range bargraph. Brightness above the threshold " ", below the threshold " ". If you press no key for 2 minutes: return is automatic to the " AUTO " mode.

External input ON override. Page Page 1 Page 2. Need help? Post your question in this forum. To reset, press simultaneously on the 3 keys "-", "menu" and "ok", i.

These programs can be modified by going to the program menu when the configuration phase is finished modification of times, operating periods, etc. The following information can be read on the display: The position of the threshold in the range bargraph The brightness range Brightness above the threshold " ", below the threshold " " The threshold value lux bb Validate your choice by pressing "ok".

To confirm the flashing word or value: validate using "ok". If you press no key for 2 minutes: return is automatic to the "AUTO" mode without saving. To guide you, setting is divided into three ranges: -- dark: 2 to 50 lux -- overcast: 60 to lux -- light: to lux 2- Set the time delay on switch-on and switch-off, from 20 to sec. Instead, contact your nearest service center! Translate this page:. Working on a speed charge battery maintainer for small engines battery.

Heat sink had 2 SR T type components on it. Seems they are an SCR and I have 57 ohms on 1 and 3 pin, so seem they are short.

Cant get these anymore but installed SR which seems to be better replacement. Before replacing, heat sink seemed to be really hot after replacng on on board 10 amp automotive slot type fuse, so seemed these SCR were bad, getting hot woth no load.

Old ones did not have heat sink compound on them, so I used some to better transfer heat. Data sheet for EM78P41 is online. Please enter the link of the video. By posting, you are declaring that you understand this policy: Your name, rating, website address, town, country, state and comment will be publicly displayed if entered.

It is collected for only two reasons: Administrative purposes, should a need to contact you arise. To inform you of new comments, should you subscribe to receive notifications.

A cookie may be set on your computer. This is used to remember your inputs. It will expire by itself. This policy is subject to change at any time and without notice. By submitting a comment, you are declaring that you agree with these rules: Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time.

You acknowledge that all comments express the views and opinions of the original author and not those of the administrator.

You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy.