Windows 2003 nlb configuration step by step

In this article I will load balance 2 servers and take you through the process step-by-step. Load Balancing takes 2 or more servers and lets them share one IP address so both servers can serve client requests. At the end of this article you should be able to configure NLB. In this example both servers only have one network card.

If you have multiple network cards you will still be able to load balance the 2 servers. Open "Network Connections" from the control panel. Check off the "Network Load Balancing" option and press "Properties". In my experience I have almost always used Multicast, which if you use you should enter a persistent ARP entry on all upstream switchs or you will not be able to ping the servers remotely.

We are going to keep the default port rules and press OK. For most scenarios I would keep the default settings. The most important setting is probably the filtering mode. Press OK to continue. NLB is using two servers say port 80 and this is connected to a nic of both servers.

I see in your example. I have 2 file servers. I intend to use NLB for the file servers. Do I configure port for both nodes? Like this: cluster Public IP x. Still waiting to get a reply…. Now i want to add another 2 node windows in existing NLB cluster. This changes will be only for temporary purpose. Yes, but only temporarily you can mix and R2 NLB nodes NLB does not support a mixed environment of unicast and multicast within a single cluster.

Within each cluster, all network adapters in that cluster must be either multicast or unicast. Otherwise, the cluster will not function properly. You are commenting using your WordPress. You are commenting using your Google account. You are commenting using your Twitter account. You are commenting using your Facebook account. Notify me of new comments via email. Notify me of new posts via email. This site uses Akismet to reduce spam. Learn how your comment data is processed. Skip to content Now that Windows is here and you want to test if the OS is as good as you want and see if the application is still running on windows In this case We build a NLB website easy with just the basic steps any one can do this.

Now is the most important step, assigning the IP to the adapter. Click OK thrice. Now its time to check whether the IP addresses have been correctly assigned. This the best ever article for Network Load balancing. Thanks so much. Please i also need some help on clustering steps using cluster administrator in server Your email address will not be published. Comments realy good and delpy understandable tutorial. Excelent Blog. Anyways nice one.

Leave a Reply Cancel reply Your email address will not be published.